FCL Intumescent Tape - Black
If you are planning to buy bulk quantities, contact us for discounted prices as well as exclusive and priority delivery options.
0330 1281212
FCL Intumescent Tape - Black
Colour: Black
Tecnofire® intumescents are available in a wide range of thicknesses and with various expansion volume and pressure characteristics. The Tecnofire® range includes both flexible and rigid products. Tecnofire® intumescents can be supplied in sheets to customers required dimensions, in large rolls, in narrow coils slit to required width or die cut to any required shape.
All grades of Tecnofire® can be supplied with self adhesive backing. Self adhesive backing is a two stage process. The surface of the Tecnofire® is sealed with a primer then self adhesive coating and release paper is applied. This results in a self adhesive
backing with high tack and minimises the risk of product delamination during use.
The surface of flexible grades of Tecnofire® can be coated to improve abrasion resistanceand appearance. The standard
coating used is black but other colours are possible
Smoke Emission
Products have been tested to BS6853: 1987 Appendix B. Clause B5.1 - Fire Precautions in the Design and Construction of Railway Passenger Rolling Stock, Three Metre Cube Smoke Emission Test. The recommended compliance criterion for Category
1 material (described as ‘Rubber/Plastics: solid, or flexible cellular’) is an Ao value of less than 0.02. The products tested meet this criterion.
Smoke Toxicity
Tecnofire® intumescents are formulated to minimise the generation of toxic fumes under fire conditions. Various grades have been tested to recognised standards and reports are available. Test results include: DIN 53436. Analysis of gases resulting from combustion at 600oC. The total yield of carbon monoxide produced by the products tested was in the range 19.09mg/g to 20.19mg/g. Cyanide, nitrate, sulphate, fluoride, chloride and bromide ions were all below detectable limits. Naval Engineering Standard 713: Issue 3 - Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials. Typical toxicity index 1.21. London Underground Ltd Engineering standard E1042: A2: March 1998. Quantitative analysis results for carbon, aluminium, silicon, sulphur, calcium, titanium, iron and chromium are available.
Surface Spread of Flame and Fire Propogation
Test results to BS476 Part 6 and Part 7 are available for certain Tecnofire® products on request.
Product Stability
With the exception of Tecnofire® 2000, Tecnofire® intumescents have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, all Tecnofire® intumescent products have considerable tolerance to damp conditions and occasional water immersion such as might occur from condensation, leaking pipes, floods or similar events in a building. Tests have shown that, after water immersion, Tecnofire® intumescents will dry out and give the same level of performance as the original sample. Further details of resistance to water and chemicals for various Tecnofire products are available on request. Tecnofire® 2000 is impregnated with a thermoset epoxide resin which results in a hard, durable and vandal resistant surface. The product has a high degree of water and chemical resistance.
FCL Intumescent Tape - Black
Colour: Black
Tecnofire® intumescents are available in a wide range of thicknesses and with various expansion volume and pressure characteristics. The Tecnofire® range includes both flexible and rigid products. Tecnofire® intumescents can be supplied in sheets to customers required dimensions, in large rolls, in narrow coils slit to required width or die cut to any required shape.
All grades of Tecnofire® can be supplied with self adhesive backing. Self adhesive backing is a two stage process. The surface of the Tecnofire® is sealed with a primer then self adhesive coating and release paper is applied. This results in a self adhesive
backing with high tack and minimises the risk of product delamination during use.
The surface of flexible grades of Tecnofire® can be coated to improve abrasion resistanceand appearance. The standard
coating used is black but other colours are possible
Smoke Emission
Products have been tested to BS6853: 1987 Appendix B. Clause B5.1 - Fire Precautions in the Design and Construction of Railway Passenger Rolling Stock, Three Metre Cube Smoke Emission Test. The recommended compliance criterion for Category
1 material (described as ‘Rubber/Plastics: solid, or flexible cellular’) is an Ao value of less than 0.02. The products tested meet this criterion.
Smoke Toxicity
Tecnofire® intumescents are formulated to minimise the generation of toxic fumes under fire conditions. Various grades have been tested to recognised standards and reports are available. Test results include: DIN 53436. Analysis of gases resulting from combustion at 600oC. The total yield of carbon monoxide produced by the products tested was in the range 19.09mg/g to 20.19mg/g. Cyanide, nitrate, sulphate, fluoride, chloride and bromide ions were all below detectable limits. Naval Engineering Standard 713: Issue 3 - Determination of the Toxicity Index of the Products of Combustion from Small Specimens of Materials. Typical toxicity index 1.21. London Underground Ltd Engineering standard E1042: A2: March 1998. Quantitative analysis results for carbon, aluminium, silicon, sulphur, calcium, titanium, iron and chromium are available.
Surface Spread of Flame and Fire Propogation
Test results to BS476 Part 6 and Part 7 are available for certain Tecnofire® products on request.
Product Stability
With the exception of Tecnofire® 2000, Tecnofire® intumescents have not been designed for full external exposure conditions and cannot be guaranteed for use in such situations. However, all Tecnofire® intumescent products have considerable tolerance to damp conditions and occasional water immersion such as might occur from condensation, leaking pipes, floods or similar events in a building. Tests have shown that, after water immersion, Tecnofire® intumescents will dry out and give the same level of performance as the original sample. Further details of resistance to water and chemicals for various Tecnofire products are available on request. Tecnofire® 2000 is impregnated with a thermoset epoxide resin which results in a hard, durable and vandal resistant surface. The product has a high degree of water and chemical resistance.
| Brand | Fire Protect |
|---|---|
| MPN | FCLBT |
| Best Seller | No |
| Recently Added | No |
Delivery
All deliveries are subject to stock and availability.
UK Mainland
**Express Delivery Cut Off – subject to cleared payments and passing of payment security checks by 12pm.
All UK Mainland orders qualify for FREE when you spend £75 ex vat or more*. *Please note certain items do not qualify for free delivery.
Consignments will be delivered using DPD, Evri, and Shipley, or direct from the supplier if stock is not readily available within our warehouse.
|
Delivery Options – Consumers |
Price (ex vat) |
Timing |
|
FREE Standard Delivery when you spend £75 ex vat or more |
£0.00 |
Monday - Friday, excluding public holidays. |
|
Standard Delivery (2-5 Working Days) |
£3.99 |
Monday - Friday, excluding public holidays. |
|
Express Delivery (1-3 Working Days) |
£19.99 |
Monday - Friday, excluding public holidays. |
|
Saturday Delivery |
£29.99 |
Saturday Delivery |
|
Same Day Delivery |
From £50 |
Monday - Friday, excluding public holidays. |
Certain items do not qualify for free delivery - this will be automatically applied at the checkout
Large heavy items may be subject to pallet charges - you will be notified by our customer care team.
Outside UK Mainland (Including Ireland)
*Please note the following postcodes are classed as Non-Mainland UK or Remote / Rural delivery: AB, IV, KW, PA, PH, HS, KA, ZE, PO30-PO41, IM, JE, GY, BT, TR21-TR25.
The following locations incur a carriage charge starting at £20.83 EX VAT
Europe
It is advised you arrange your own courier collection from our warehouse. If you require assistance Dortech Direct can schedule a delivery for you. Prices are dependent on box quantity and order weight. Please call our sales team for a quotation on 0330 1281212.
United States
Pricing Information
All product prices are available on quotation only. To receive a customized quote, please contact us directly with your product requirements. We will respond promptly with pricing, availability, and shipping details tailored to your request.
Shipping Information
We are pleased to offer shipping to most locations within the United States, excluding Hawaii and Alaska at this time.
-
Eligible Shipping Areas: Continental United States only (Excludes Hawaii and Alaska)
-
Delivery Timeframe: Estimated delivery is 10–14 working days from the date of dispatch
-
Shipping Confirmation: A confirmation email with tracking details will be sent once your order is shipped
Please note: Delivery times are estimates and may be affected by external factors such as customs processing or carrier delays.
Other Information
Please Note
- All available delivery options will be displayed at checkout/basket pages
- Working days do not include Weekends or Bank holidays
- For all enquiries ring 0330 1281212 / sales@dortechdirect.co.uk
BACS & Purchase Orders
- The delivery times & dates are only valid from receipt of funds or valid PO number
Damages
By ordering with Dortech Direct you agree to inspect goods upon delivery. Damaged goods should be rejected. If you notice damage after the goods are delivered, you must report this to us within 48 hours of delivery. Dortech Direct does not accept damage liability for issues reported over 2 working days from the point of delivery.
You can report damage by sending your order details and images of any issues to helpteam@dortechdirect.co.uk
Returns
If you wish to initiate a product return within 14 days, we gladly offer a refund as long as the item is returned in its original condition, including all packaging, tags, labels, and accessories. Kindly complete the provided return form and include it in the package you are sending back.
Ensure that you diligently fill out all the necessary fields on the Returns Form.
Delivery & Returns for Trade
|
Delivery Options - Trade |
|
Timing |
|
FREE Delivery on any Trade order |
£0.00 |
Monday - Friday, excluding public holidays. |
We will deliver into branch or direct to any customer office/site address.
Returns
If you wish to initiate a product return within 14 days, we gladly offer a refund as long as the item is returned in its original condition, including all packaging, tags, labels, and accessories. Kindly complete the provided return form and include it in the package you are sending back.
Please be aware that orders exceeding £100 excluding VAT are subject to a non-negotiable 40% restocking fee. This charge represents the administrative time and overheads to reprocess the stock.
Ensure that you diligently fill out all the necessary fields on the Returns Form.